Latest News:

autotechnician - serving the independent workshop - logo

New Borg & Beck Clutch Test Facility…

Technicians need to be confident in the quality of all the products they install. Because of the demands on the system and time now required to fit a replacement, clutches in particular need to be of the very highest quality. Quality is the founding principle for the First Line Group and its Borg & Beck Clutch programme, which is why it has invested in a testing facility to ensure that quality is guaranteed across the range.

Housed in its Banbury HQ, the facility enables the team to manage the whole process of quality control, testing and warranty management. With influence over the specification and design of its components Borg & Beck Clutch is renowned for its premium quality making it one of the best on offer. Not only are all components checked against OE specification, and tested to carry out prolonged performance trials, the facility also enables the team to subjectively analyse any warranty claims and diagnose faults, meaning claims can be resolved in an optimum time.

Using an assortment of specialist rigs, the team is able to carry out a wide variety of product tests including clutch cover assembly loads and releasing movements, the torsional load / vibration and cushion deflection curve of drive plates, the static assessment of dual mass flywheels (DMF) and the performance and durability of concentric slave cylinders (CSCs). Once completed, each test is accompanied by a detailed test report.

Screen Shot 2016-03-23 at 12.06.48






Common Installation Errors…

There are several things that can go wrong when it comes to clutch installation, but alignment related issues are fast becoming among the most common.

The consequences of not aligning the input shaft correctly when reattaching the gearbox back onto the engine are very evident and will lead to symptoms such as clutch judder, drag or, in the worse case scenario, the total loss of drive to the transmission.

The results of inspecting misaligned clutch components reveal that what tends to happen as the gearbox is being offered up to the engine, is difficulty in locating the splines on the input shaft into the corresponding splines on the drive plate. Some technicians have even admitted to resorting to using long bolts between the gearbox housing and engine, to force the two surfaces together.

This practice should never be undertaken as it can cause significant damage, not just to the input shaft and/or drive plate, but also to other interrelated clutch components.

Another common cause of misalignment occurs when a technician does not use a suitable stand or support when guiding the gearbox into position. If the gearbox input shaft has only been partially inserted through the new clutch drive plate and is then ‘hung’, because the stand is dropped before the gearbox is mated to the back of the engine, and at least some of the securing bolts fastened, then damage to the drive plate and/or input shaft is highly likely to occur.

Both of these misalignment issues can be easily avoided with a little sensible preparation and by following the correct installation procedures as set out by the vehicle manufacturers, which are available through reputable technical service data providers such as TecRMI.

For more information about the premium quality products available from the First Line Group, please call the sales team on: 01869 248484 or visit the First Line Group website.

About Autotechnician
Autotechnician is a magazine published nine times a year, delivering essential information to independent garage owners and technicians in the UK. Delivered both digitally and in print, autotechnician provides readers with technical, training, business advice, product and news, allowing our readers to keep up to date with information they need to run and work within a modern workshop.
Aftermarket Media Solutions Ltd, The Joiners Shop, Historic Dockyard Chatham, Kent ME4 4TZ
T: 01634 816 165
Company no. 09625886
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram